4040 Cinderblock-Style Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slides right on your 4040 rail for additional 50mm height!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 50
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Upgraded V2 - Locks On TIGHT!
Some feet to slide on you 4040 Rail to add some lift!
No issues with vibes (printing speeds up to 120mm/s & 800mm/s Acceleration tested on a Sovol SV04).
Added Self-Adhesive furniture pads to the bottom for grip
Height added is 50mm (57 Total)
2 Widths for easy printing, OR you can scale up/down your Z in your slicer to any width
Print in PLA or PETG. Just be aware that PLA has a lower melting temp.
Currently using PLA ones with zero issues but I don’t print over 260.
Printed in Polyterra Matte Black PLA @ 202/60 .6 Nozzle .28LH / .8LW
3 Walls
4 Top/Bottom - Concentric
Cubic infill 40-60%
Print on side - No Supports or Brim should be needed
For the SV04 - 2 x 40mm - Front - 2 x 30mm - Rear
No need to remove stock feet!
Fit should be tight on V2!
I GENTLY tapped them on w a rubber Mallet :)
Enjoy and please post your makes!