1 / 2
Conformal Launch Lug / Guide for 4 inch, 3 inch, 2.6 inch, 2 inch Diameter Model Rockets (1 inch T-slot rail) — image 1
1 / 2

Conformal Launch Lug / Guide for 4 inch, 3 inch, 2.6 inch, 2 inch Diameter Model Rockets (1 inch T-slot rail)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a launch lug or launch guide is used to keep your rockets going straight!

Rating
0 / 5
Likes
8
Downloads
136
Makes
0
Views
692
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

Update 2025-01-23: Added 2.6 and 2 inch diameter versions. And 4 inch!

This is a launch lug or launch guide is used to keep your rockets going straight! This design works best with one inch wide aluminum T-slot extrusions and rockets whose body is 3 inches in diameter (but other sizes will work if you have enough glue). These launch guides mount to the body with epoxy, so they are easy to mount to a model.

The STEP or STP file is uploaded along with a ready to print STL. These STEP files can be imported into several CAD programs (like Fusion 360) and modified as if they were created in that software. This allows for easy remixing. Want to make it work with a different extrusion or a different diameter rocket? Go ahead and import the STEP file as a starting point and get modeling!

Fly safe!

Print instructions

Unassociated tags: 3 inch, 3 inch diameter, aluminum extrusion, conformal launch lug, large rocket, launch guide, launch lug, launch rail, model rocket, one inch, STEP file

Category: Hobby Summary

This is a launch lug or launch guide is used to keep your rockets going straight! This design works best with one inch wide aluminum T-slot extrusions and rockets whose body is 3 inches in diameter (but other sizes will work if you have enough glue). These launch guides mount to the body with epoxy, so they are easy to mount to a model.

The STEP or STP file is uploaded along with a ready to print STL. These STEP files can be imported into several CAD programs (like Fusion 360) and modified as if they were created in that software. This allows for easy remixing. Want to make it work with a different extrusion or a different diameter rocket? Go ahead and import the STEP file as a starting point and get modeling!

Fly safe!

Print Settings

Rafts: Doesn't Matter

Supports: No

Infill: 100

Tags