Arduino RGB lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RGB lamp, heavily inspired by 3DMakerNoob (https://youtube.com/c/3DMakerNoob ).
- Rating
- 0 / 5
- Likes
- 86
- Downloads
- 173
- Makes
- 0
- Views
- 2,319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
RGB lamp, heavily inspired by 3DMakerNoob (https://youtube.com/c/3DMakerNoob ).
Depending on how you orient the spikes, you'll end up with different styles. In the one that i've made, i sanded the holes a bit to tilt the spikes backwards.
The parts are pressed to fit, you need 16 spikes in total.
The base and cap are printed with PLA and the spikes are printed with clear resin.
The outer diameter of the LED ring is 45mm and is controlled by a Arduino Nano clone.
The arduino sketch is provided (data cable on pin 5)
Links:
Arduino Nano clone: https://www.aliexpress.com/item/32341832857.html?spm=a2g0s.9042311.0.0.147f4c4dQEzsu7
16 bit LED Ring: https://www.aliexpress.com/item/32658218780.html?spm=a2g0s.9042311.0.0.147f4c4dQEzsu7
https://www.youtube.com/watch?v=3QOM\_ig-koI
Print instructions
Resolution: 0.2 FDM & 0.05 mSLA