Toolbox interior optimizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Click holders for tools for more optimal space utilization of my toolbox
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 14
- Makes
- 0
- Views
- 299
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
More space in my toolbox with these parts through better use of the available space
better use of space in the toolbox due to these parts .
maybe someone else can use this for anything something
All holders are fastened with M4 x 10mm screws. It has no thread in the parts, the screws can be screwed directly into the PLA holes.
My hammer handle indeed is oval and has the cross section 17mmX25mm.
The folding rule has the cross section 18mm x 30mm.
I have developed the holders according to these dimensions.
If larger tools need to be attached, the holders can be enlarged accordingly with scaling e.g. in the slicer software.
Holes for the mounting screws: 3.2mm.
Please note that when scaling the components, these holes also become larger or smaller and possibly other mounting screws must be used.
Viel Spass damit :)
Have fun