Exhaust fitting for 3D printer enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an exhaust fitting I developed for my Lulzbot Taz 4 or 5 printer enclosure, but it could be used for any kind…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 29
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an exhaust fitting I developed for my Lulzbot Taz 4 or 5 printer enclosure, but it could be used for any kind of exhaust needs. (see thing: http://www.thingiverse.com/thing:746922) It is designed to mount to a 50x50mm dc fan, and screw into 2.5" exhaust hose from McMaster-Carr: http://www.mcmaster.com/#5398k12/=wjk94g
This fitting threads into the non-flared end of the hose, and provides mounting to the fan and enclosure outlet port.
*Update 12-6-2015* Check out the wall mount version of this: http://www.thingiverse.com/thing:1178146
Instructions
I printed this with 2 shells, 40% infill. Depending on how you mount this fitting it could see a lot of stress. The exhaust hose it is designed for is heavy. So depending on your application, you might consider 100% infill.
When printing in ABS you should scale it up 1.01 in X and Y and 1.005 in Z to account for shrinkage.
Category: 3D Printer Accessories