Enclosure for the Black Magic Probe (v2.3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an enclosure for the Black Magic Probe v2.3 (a debug probe for ARM Cortex-M and Cortex-A microcontrollers).
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 104
- Makes
- 1
- Views
- 614
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is an enclosure for the Black Magic Probe, a debug probe for ARM Cortex-M and Cortex-A microcontrollers. The Black Magic Probe exists in several hardware versions; this enclosure is for the current version: 2.3.
See also the enclosure for hardware version 2.1.
The cover is removable; it simply uses "friction-fit", but it is effective. There is an optional (wedge-shaped) rim around the debug connector, to protect the shrouds of that debug connector. This rim must be glued onto the top cover. The rim is optional, but I recommend it: the plastic shrouds of the debug connector are quite fragile.
Like my design for the earlier version, this design has an opening for a slide switch. The Black Magic Probe originally does not have a slide switch, but I extended mine with one. In the OpenSCAD design file, this extra opening can be disabled.
Print instructions
For friction-fit, PLA works well. The version pictured here is in Prusament PVB with variable layer height between 0.1 and 0.25 mm. A brim or supports are not needed.