Prusa MK3s switch holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 switchs holder mounted on original MK3S Lcd support.
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 173
- Makes
- 0
- Views
- 1,953
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
2 switchs holder mounted on original MK3S Lcd support.
It's design for this switch :
https://fr.aliexpress.com/item/4000138435058.html?spm=a2g0s.9042311.0.0.54d26c37NOTyTl
type: SPST
on-off 2 states
AC 250 V/15A 125 V/20A
3 pins
inner size: 27mm x 10mm/1.09 "x 0.4" (L W)
full size: 31mm x 14mm x 35mm/1.2 "x 0.6" x 1.4 "(L W* H)
There 3 versions :
M3, M4 or M5 screw and nuts (M' and M5 not tested)
Have fun and let me know if something wrong ;)
Print instructions
Category: 3D Printer Parts Summary
2 switchs holder mounted on original MK3S Lcd support.
It's design for this switch :
https://fr.aliexpress.com/item/4000138435058.html?spm=a2g0s.9042311.0.0.54d26c37NOTyTl
type: SPST
on-off 2 states
AC 250 V/15A 125 V/20A
3 pins
inner size: 27mm x 10mm/1.09 "x 0.4" (L W)
full size: 31mm x 14mm x 35mm/1.2 "x 0.6" x 1.4 "(L W* H)
There 3 versions :
M3, M4 or M5 screw and nuts (M' and M5 not tested)
Have fun and let me know if something wrong ;)
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.3
Infill: 15%
Filament: Prusament PLA - PETG Galaxy black
Notes:
It's design to use less supports. The design is made with small gap for 0.3 printing.
Post-Printing
remove support, glue if necessary block_support_Mx and button_block.
insert in original lcd support and use a Mx screw and not to lock all in place.