ESP32 Energy Monitor Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this case for an inductive energy monitor using an ESP32 and Sct-013 Sensor
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 50
- Makes
- 0
- Views
- 2,119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I made this case for an inductive energy monitor.
The case is divided into three parts and also has plastic part that makes the ESP32 and PCB stay in place.
The case snaps shut without any fasteners. Screw holes are provided as a an added security measure.
Im adding the gcode, stl and fusion360 file so you can adapt as needed.
Im also adding the circuit diagram and pcb diagram in case you are interested.
Code for the project can be found here:
https://github.com/portfedh/CurrentSensorsMQTT
Code for the project was based on these tutorials:
https://saber.patagoniatec.com/2016/08/medidor-de-corriente-30a-sct013-030/