Traxxas 4tec 2.0 Chassis Spoiler Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is made around the 4tec 2.0 Chassis, and modeled around the Mustang GT Body, it may fit other bodies.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 200
- Makes
- 1
- Views
- 898
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
*New Update just up-loaded: 01-22-2025 “File name labeled with UPDATE-v2.” See file for further update details.
**New Update just up-loaded: 02-01-2023 “File name labeled with UPDATE.” See file for further update details.
***Had to brace the wing legs with two pieces of glue stick and tape to strengthen them during printing on original version, on the prusa printer.
Made this 1/10 Traxxas 4tec 2.0 chassis mustang bodied car. It is a modular design that allows for different style of wings and tips. With that being said I have a few designs I am making for the ends and the wing itself.
It mounts almost 100% flush in factory location with 3 screws along with the small chassis enforcement bar. It does flex very well and can hold the weight of the car well, although I cannot promise the spoiler / wing legs will hold the full weight in a straight up and down because of the print position.
The wing / spoiler is held on by one screw in each leg, the holes are 3mm x 0.50 thread pitch and 10mm deep in the design, hard to tell if the threads are actually there but should be perfect for all RC screws up-to 10mm in length.
Print Settings: Prusa
- PLA PRO -Inland
- Extrude Temp - 219c
- First Layer Hight - .32
- All other layers - .20
- Infill - 25%
- Concentric Top / Bottom Layers
- 85% speed on Prusa mks3
Print Settings: Creality K1 Max
- PLA PRO -Inland
- Extrude Temp - 230c
- Bed Temp - 50c
- All Layers - .20mm
- Infill - 50%
- Top Layer Pattern -Monotonic Line
- Bottom Layer Pattern - Monotonic