Drone Tripod Landing Pad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Whether you need to get above an obstacle or want to take your takeoff / landing skills to the next level.
- Rating
- 4.5 / 5
- Likes
- 91
- Downloads
- 159
- Makes
- 2
- Views
- 3,116
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Whether you need to get above an obstacle or want to take your takeoff / landing skills to the next level. Built to take advantage of a Prusa spool, print the parts, snap into place and let you imagination take flight.
Print instructions
Instructions
The base level of parts are (2) files that print the core of the spool to attach to a standard tripod. For additional consideration a standard 6.35mm (1/4") diameter hole for additional mounting options. The core is a two piece print that creates a small storage container, 17mm (.6") deep with a 40mm (1.5") diameter.
Example: 12 full size SD cards fit.
If your drone does not fit on the spool then print (4) parts that create an exterior ring for additional surface area. These parts will snap fit into the spool in the following orientation. The smaller pieces attach at the top (12 o'clock) and the bottom (6 o'clock) location. The two larger pieces connect to the left and right respectively. You can add a small amount of cyanoacrylate (super glue) or small zip ties to further secure the extension ring and core.
If the drone has landing skids you can mount the spool upside down, screw the lid on have different landing area.
Additional Parts
Included some additional center core lids that have some customization and the inset design.
YouTube - https://youtu.be/03fo-4sV7Bg