1 / 1
Ducted Fan Fidget Spinner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fidget spinner fan inside of a duct. Uses a single 608 bearing.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 89
- Makes
- 0
- Views
- 598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Boredom leads to weirdness. The design uses a single 608 bearing and can be printed in either PLA or PETG at 0.1-0.2mm layer height with a 0.4mm nozzle.
I printed the fan in Green PETG and the duct in Grape Purple PETG both at 0.2mm layer, 0.4mm nozzle, 70mm/s and 50mm/s wall, 235C nozzle, and 75C bed on my Ender 3 S1.