1 / 3
Shelly H&T Case (external Power Supply)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple case for the Shelly H&T sensor. One Base is with mounting points for a step down module one is…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 85
- Makes
- 0
- Views
- 1,078
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a simple case for theShelly H&T sensor.
One Base is with mounting points for a step down module one is without them.
Both come with a 4mm hole for a USB Cable.
The Shelly H&T twists into the lid like in the original case
As the Shelly H&T only is rated for 3V you should use some type ofvoltage regulator!
additionaly needed:
- 4 2.9mm x 9mm screws for the lid
- 2 2.9mm x 6mm screws for the step down module if used
- USB Cable
- Voltage regulator / Step down Module
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
15%
Category: Electronics