1 / 6
Broom Holder R2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Broom Holder / Gripper
- Rating
- 4.964 / 5
- Likes
- 417
- Downloads
- 1,446
- Makes
- 34
- Views
- 13,840
- Reviews
- 28
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I saw broom grippers in store the other day so I challenged myself to design my own
You can choose between 3M strips, double side tape* or screws* to install it
- However i have not tested the versions that uses double side tape or screws
Guess mine aren't as good as the real stuff but it works for me ;-)
- The gripper does not always spring back to the original position
- Simply pull the broom slightly diagonally
Print Settings (PrusaSlicer 0.20mm Quality)
- Nozzle diameter : 0.40 mm
- Layer height : 0.20 mm
- Perimeters : 3
- Gripper
- Filament : TPU90, TPU95 (TPU98 maybe not)
- Solid layers (top and bottom) : 4
- Infill : Gyroid, 20%
- Holder
- Filament PETG (PLA maybe not)
- Support on build plate only
- Support style : Snug
- XY separation : 100%
- Clamp and Pin
- Infill : Rectilinear, 100%
Change Log
- 2024-12-16 Broom Holder R2
- Added a revised version of the Gripper
- 2023-02-03 as requested by Sasa Pantelic
- Added a wall mount with the flat back side
- So you can use double-sided tape in all shapes
- Added a wall mount with the flat back side