Desk Cable Management Hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover for a cable management hole in your desk. The cover freely rotates and lifts off for bulk plug passthrough.
- Rating
- 4.5 / 5
- Likes
- 88
- Downloads
- 459
- Makes
- 2
- Views
- 2,076
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
A simple plastic cover for a cable management hole in your desk. The lid is freely removeable and rotatable to make it easy to get bulky plugs through the gap. Can print both pieces together or separately.
The lid has a 0.2mm tolerance which should be okay, but if you have trouble then I recommend printing at around 98% scale.
The model is 70mm diameter, but the cylinder that slides into the desk is 60mm, with a 1mm thick wall, so the inside hole is 58mm in diameter.
It should be scalable, but when less than 50% the walls can get a little thin.