1 / 6
MK3s Extruder rear cable clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cable clip to replace zip ties on the MK3. Update - Minor upgrade to improve ease of use and printing.
- Rating
- 4.773 / 5
- Likes
- 154
- Downloads
- 736
- Makes
- 16
- Views
- 4,514
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A cable clip to replace zip ties on the MK3.
Update - Minor upgrade to improve ease of use and printing.
Instructions: See photos, Place clip over wires and sleeve, Insert allen key, Place heater wires on bottom and thermistor wires on each side, Slide clip forward using allen key, Slide cap on and remove allen key.
I have only tested with the fabric wire sleeve and not the spiral wire sleeve so if any one has and finds its too loose please let me know and I will add a spiral wire sleeve version.