1 / 4
PC speaker housing.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
El Cheapo PC speakers into Fancy Cheapo speakers.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 108
- Makes
- 0
- Views
- 768
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn ugly cheap PC speakers into somenthing more fancy.
Fitting for 2.5 inch speaker elements.
Housing and frontplate are designed so that no supports are needed when printing.
Needed materials:
- 8 pcs M4 x 10mm socket head cap screws
- 8 pcs M4 nuts
- Soldering iron
- 4 mm drillbit
- Super Glue or equivalent
Steps for assembly:
- Open the original speaker housings and unscrew the speaker elements
- De-solder the wires from the speakers, take note of polarity (what color wire goes into ‘+’ and ‘-’ terminals
- Clean the screw holes of the new frontplates with a 4 mm drillbit
- Mount the speaker elements into the new housing
- Thread the wires trough into the new housing and make a not on the inside
- Solder the wires back into the correct terminals
- Put a litle of Super Glue around the bezel, and place the frontplates on the housing
- You can secure the frontplates with tape strips until the glue has cured