1 / 3
X2 ELF 88 mini kit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
18650 battery holder and landingfeet
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
18650 battery holder
I am using a DYI 18650 (LG HG2) with spot welded nickel strips and soldered XT30 lead.
The battery strap is an iFlight 10mm strap shortened by about 10mm.
Supports are required if printing in default orientation.
Printed in TPU.
Landing feet
I modified the bottom plate of the frame to acommodate a whoop 1s FC with a bottom facing USB. These feet raise the quad 10mm from the ground. They also fasten with only two 6mm M2 screws (I am using nylon).
I printed a set of 5 at a time, laying them flat on the mounting face, no supports required.
Printed in TPU.