1 / 2
CR-10 heatbed cable guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gently guides the heatbed cable over the frame corner. Two version are available: Non Threaded Threaded : Choose the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 1
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Gently guides the heatbed cable over the frame corner.
Two version are available:
- Non Threaded
- Threaded : Choose the threaded one if the extremity of your aluminum is tapped
You'll need either one or two M5 T-nut depending on the selected part and two M5 screws.
If you use Slic3r, you can use Split to Part to select the internal holes and adjust finely the infil
Source: Onshape
Category: 3D Printer Parts