Video Doorbell Toggle Switch Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.68 – €0.83 net (excluding VAT)
For file: Doorbell Switch_0.2mm_PETG_MK3S_54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.76 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 54 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mount for a toggle switch used to turn on, off, or reset a video doorbell
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 91
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Our video doorbell is hardwired into the 24v AC transformer. Unfortunately, the doorbell occasionally needs to be reset by removing power. This was cumbersome and required disconnecting the wire from the transformer. A toggle switch was put in series to easily remove power and reset the video doorbell. This model is used to mount the toggle switch used for this purpose.