Micro Splitter for MMU2+1s mod (1 filament)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Micro Splitter for MMU2+1s mod to be used with only one filament.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 36
- Makes
- 1
- Views
- 718
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I usually print in MMU Single and sometimes I'm having trouble with the splitter at the load of filament and also this frees some tension on the X Carriage putting aside the rest of the tubes. This works like a charm.
Created two versions, one for M10 PTFE plug and another one for ECA PTFE Clip.
Print upside down and no supports needed (The bridge for the splitter clip itself will print fine)
I've inserted a layer to support the hole (shown on the images), you will have to remove it before inserting the ECA or the M10 plug.
PTFE is meant to be inserted pass through the splitter to be fairly close to the bottom one (6mm away, see attached Fusion drawing).
UPDATE: ECA version updated as the PTFE didn't get through. Now it gets ;)