TieSpooler
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: RedDot_0.2mm_PLA_MINI_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Create Your Fighter with the pieces from a empty spool.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 16
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
This model is a way to reuse the plastic part of a prusament spool. If you don't have a empty spool, don't worry, you will have it before you finish printing this model (it's become a little more bigger than i expect).
Every wing are made with a pieces of spool, and 8 printed pieces: 4 WingForo and 4WingExag. The gcode for this two article are made with a change color, the console too. I suggest to use the black filament first, then switch on white or gray.
For this model you will need some screw, but you can try to glue it all if you want.
Old version:
x4 M5x50 Cylindrical Head
x4 M6x45 Cylindrical Head
x72 M5x10 Cylindrical Head
x32 M5x16 Cylindrical Head
x108 M5 Hex nut
x1 Ø5 Cylindrical pin
New version:
x8 M6x45 Cylindrical Head
x39 M5x10 Cylindrical Head
x24 M5x16 Cylindrical Head
x64 M5 Hex nut
x4 M6 Hex nut
x1 Ø5x50 Cylindrical pin