Gravitrax compatible Cannon for 15 / 13 mm magnets - with bypass
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gauss Cannon with bypass for several 15 and 13 mm magnet disks. Gravitrax compatible!
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 181
- Makes
- 0
- Views
- 1,430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Gauss Cannon with bypass for several 15 and 13 mm magnet disks.
13 x 1.5 mm
13 x 2 mm (not tested yet)
15 x 2.5 mm
it is Gravitrax compatible.
inspired by uhltimate fast reload cannon (go check it!) I designed this one to fit my magnet disks lying around. the bypass allows a very quick reload.


After printing:
- you have to sacrifice one ball to the chamber ;)
- clean the print carefully after printing!
- Do NOT glue the magnet in! allow the magnet to move freely.
my printsettings:
PLA (clean print is important… PLA might be a good choice)
0.2 - 0.25 mm
no support
brim: depending on your printer and Filament
I started by remixing this tinkercad tile
the base ring snaps well in, if not in your case, please let me know!