1 / 3
Gravitrax compatible Cannon for 15 / 13 mm magnets - with bypass — zdjęcie 1
1 / 3

Gravitrax compatible Cannon for 15 / 13 mm magnets - with bypass

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gauss Cannon with bypass for several 15 and 13 mm magnet disks. Gravitrax compatible!

Ocena
0 / 5
Polubienia
25
Pobrania
181
Wydruki
0
Wyświetlenia
1430
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a Gauss Cannon with bypass for several 15 and 13 mm magnet disks.


13 x 1.5 mm
13 x 2 mm (not tested yet)
15 x 2.5 mm

it is Gravitrax compatible.

inspired by uhltimate fast reload cannon (go check it!) I designed this one to fit my magnet disks lying around. the bypass allows a very quick reload.
 

 

After printing:
- you have to sacrifice one ball to the chamber ;)
- clean the print carefully after printing!
- Do NOT glue the magnet in! allow the magnet to move freely.

my printsettings:
PLA (clean print is important… PLA might be a good choice)
0.2 - 0.25 mm
no support
brim: depending on your printer and Filament

I started by remixing this tinkercad tile
the base ring snaps well in, if not in your case, please let me know!
 

Tagi