1 / 2
Adjustable spool holder for 6002 15mmID bearings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool holder for both narrow and wide spools. From Fillamentum spool width up to Filament PM one.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 84
- Makes
- 1
- Views
- 634
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
- Spool holder - a total remix of the prusa enclosure fully printable one. I've re-mixed it so it can use the 6002 bearings I had plenty of lying around. And this is what came out from re-mixing it like 5 times more at least. One of the goals was to make it work with the very narrow 0,5kg spools as well.
- 6002 bearing fasteners. You may need to sand these a bit and ream the opening, or play around with the scaling, depending on your print settings.
- filament guides which go onto the printer frame so the spool can be nex to the beatbed and be kept hot = dry during printing in an enclosure