1 / 2
3D Chameleon switch mount for Bambu P1P
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slight change to the original bracket to clear a rib on the back of the machine, that caused the bracket to deflect.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 0
- Views
- 796
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original switch bracket hits a rib on the back of the machine, and makes the switch deflect upwards. It was causing inconsistent triggering of the switch. I add a recess on the back of the bracket, so it would mount flat on the back of the machine.
I only have the P1P, but presumably this wouldn't be needed on the X1, or a P1P that has side panels, as the rib would probably be covered.