Voron V0.1 V0.2 DIN Rail Board Mounting System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A robust and adjustable mounting system for the Voron V0 to fit BTT SKR and Raspberry Pi boards on the back panel area.
- Rating
- 4.727 / 5
- Likes
- 224
- Downloads
- 1,134
- Makes
- 13
- Views
- 6,752
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't like the VHB sticky tape mounted boards design on the Voron V0.1 or V0.2 so I designed a better one which is adjustable and removable.
Features
- Easily readjust your boards if you want to.
- Adjustable vertical position of DIN rail.
- The DIN Rail is flush with the horizontal extrusions of the printer so an extra vertical rail can be added (for cable organisation purposes).
- Adjustable vertical and horizontal position of the board mounts
- Slim design: The boards' connectors doesn't extend beyond the back panel even with ADXL adapter attached to Raspberry Pi.
Parts in the package
- Voron V0 Back DIN Rail Mount
You will need 2pcs of this. The DIN Rail should be exactly 200mm long. The mount has snap fit elements to hold the DIN rail firmly. Add 2-2pcs to the side extrusions and fit the mount with 2-2pcs M3x8 BHCS screws. You can adjust the vertical position easily by sliding the rail with loosened screws! - DIN Rail Snap Fit Mount
You can snap two of these on the rail. Then you will attack the custom board adapters to this. You will need 2pcs M3x5x4 heat set inserts to place in the holes for mounting the adapters. Or you can edit the included source files to make the holes smaller for self tapping screws if you don't have heat set inserts. You can mount the custom adapters with 2pcs M3x6 BHCS screws. - BTT SKR Pico or Raspberry Pi Mount
Use this for the purpose of mounting a board mentioned in the name :) You can mount the board with 4pcs M3x6 BHCS screws which self-tap into the adapter. - BTT SKR Mini E3 Mount
Same as above.
Printing
No extra stuff here. I printed them with 3 perimeters, 20% infill.
Source files?
I included the Fusion 360 .f3d source files for easy modification. Including source files is cool :)
Misc
Voron V0.1 and V0.2 comparison for the printed parts:
https://docs.google.com/spreadsheets/d/1B-PMh5jIi-f208l2VYXJ8LcJjfaGRh1zJigpPjt-6N0
Feedback is important!
I spend countless hours perfecting and testing my designs and I would love to hear your feedback too. If you like my designs I appreaciate a like or a comment. Please post a photo if you print this.
Donations
I am open to any kind of donation if you want to support me :)