1 / 3
Voron V0.1 V0.2 DIN Rail Board Mounting System — zdjęcie 1
1 / 3

Voron V0.1 V0.2 DIN Rail Board Mounting System

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A robust and adjustable mounting system for the Voron V0 to fit BTT SKR and Raspberry Pi boards on the back panel area.

Ocena
4,727 / 5
Polubienia
224
Pobrania
1134
Wydruki
13
Wyświetlenia
6752
Oceny
11

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't like the VHB sticky tape mounted boards design on the Voron V0.1 or V0.2 so I designed a better one which is adjustable and removable.

Features

  • Easily readjust your boards if you want to.
  • Adjustable vertical position of DIN rail.
  • The DIN Rail is flush with the horizontal extrusions of the printer so an extra vertical rail can be added (for cable organisation purposes).
  • Adjustable vertical and horizontal position of the board mounts
  • Slim design: The boards' connectors doesn't extend beyond the back panel even with ADXL adapter attached to Raspberry Pi.

Parts in the package

  • Voron V0 Back DIN Rail Mount
    You will need 2pcs of this. The DIN Rail should be exactly 200mm long. The mount has snap fit elements to hold the DIN rail firmly. Add 2-2pcs to the side extrusions and fit the mount with 2-2pcs M3x8 BHCS screws. You can adjust the vertical position easily by sliding the rail with loosened screws!
  • DIN Rail Snap Fit Mount
    You can snap two of these on the rail. Then you will attack the custom board adapters to this. You will need 2pcs M3x5x4 heat set inserts to place in the holes for mounting the adapters. Or you can edit the included source files to make the holes smaller for self tapping screws if you don't have heat set inserts. You can mount the custom adapters with 2pcs M3x6 BHCS screws.
  • BTT SKR Pico or Raspberry Pi Mount
    Use this for the purpose of mounting a board mentioned in the name :) You can mount the board with 4pcs M3x6 BHCS screws which self-tap into the adapter.
  • BTT SKR Mini E3 Mount
    Same as above.

Printing

No extra stuff here. I printed them with 3 perimeters, 20% infill.

Source files?

I included the Fusion 360 .f3d source files for easy modification. Including source files is cool :)

Misc

Voron V0.1 and V0.2 comparison for the printed parts:
https://docs.google.com/spreadsheets/d/1B-PMh5jIi-f208l2VYXJ8LcJjfaGRh1zJigpPjt-6N0

Feedback is important!

I spend countless hours perfecting and testing my designs and I would love to hear your feedback too. If you like my designs I appreaciate a like or a comment. Please post a photo if you print this.

Donations

I am open to any kind of donation if you want to support me :)

https://paypal.me/andrasbognar

Tagi