Tair 3 Tube Ring Inserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inserts that allow a Tair 3 to be used with standard 90mm Skywatcher tube rings.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 626
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
Quick and Dirty. Allows you to use the Tair 3 with Skywatcher 80-90mm tube rings. In order to use the print effectively you need to remove the cocking mechanism (this is just 4 screws holding it in place).
You need to cock the mechanism to the aperture is fully open and then use stepdown rings to get the best F-ratio. I also highly recommend lining the inside of the insert with flocking material to increase friction. I've used this setup successfully to image with the tair 3 and a dedicated astro camera.
There are 3 inserts which correspond to the 3 different diameters of the tair 3 allowing you to fit them best for your setup.