1 / 9
*Updated* HMG7 Creality Single Gear Rear Mount (Remix V2) — image 1
1 / 9

*Updated* HMG7 Creality Single Gear Rear Mount (Remix V2)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

remix to allow the stock Creality extruders (metal and plastic) to be fitted to it a lot easier

Rating
0 / 5
Likes
12
Downloads
66
Makes
1
Views
545
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

the first time i printed this i had a hell of a time trying to put it together as i had to have the tension adjustment bolt in place and one of the motor screws as the tension adjustment bolt blocks it being put in or removed and when i did get it together i would not have been able to load filament as there was not enough room to let the end of the lever move so here is a remix to fix this

now updated in Fusion 360 for a much neater model

Changes (from the original R 1/2.1 version):

-cut left side for lever arm, filleted and chamfered to match
-lowered right side for plastic extruder body clearance, filleted and chamfered to match
-cut hole for tesion screw, added .25mm chamfer
-added 0.5mm to the angled face next to the tension bolt hole so it didnt end up too thin, then fileted and chamfered edges to match
-noticed that the filament path hole was slightly off centre (maybe .2-.3mm), adjusted it a little so i would stop noticing it lol

 

for printing follow original instructions

 

Assembly Order:

1. remove all screws from the extruder body and place it in the mount

2. put in the 3 screws that secure the extruder and motor to the mount

3. attach the extruder arm and then put the spring in

4. lastly put in the tension adjustment screw

Tags