1 / 11
Fanatec Formula Shifter Magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shifter magnets for Fanatec Formula wheels.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 177
- Makes
- 0
- Views
- 2,241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Shifter magnets for Fanatec Formula wheels. Available in two variants, 6mm magnets for light actuation, and 8mm magnets for heavy actuation.
Required Hardware:
(4) 6 x 2mm disk magnets OR (4) 8 x 2mm disk magnets
(4) M3 x 5mm countersunk screws
Installation Instructions:
- Remove shifter paddles.
- Use super glue to attach the magnets to the printed pieces. IMPORTANT: Make sure the magnet polarity is correct so that the printed pieces are attracted to each other. Wait for the glue to dry.
- Attach the flat printed piece to the wheel using the countersunk screws.
- Put the bent piece in place. The magnets should hold it in place.
- Re-install the shifter paddle using the original screws.
- Repeat for the other side.