SV06 LED Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable LED Mount for the SV06
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 1,154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
This is an LED mount for the Sovol SV06. It can be adjusted using the modular mounting system arms, I used one 180mm straight arm for the back, 2 axis changers and 2 120mm straight arms. The files can be found here: https://www.printables.com/de/model/185322-modular-mounting-system-arms-customizable
It can be mounted using the screws of the spoolholder, you need to buy 2x M5x14 screws, so that they're long enough to hold both the spoolholder and the mounting plate. Use short strips with lots of LEDs, you can mount them on the sides of the LED holder with aluminium foil covering the back or on the bottom of it, shining straight at your printer.
The LED mount will not be in the way of your Z or X axis or your spool. There is an opening of 16.5mm x 10mm to fit a SM JST 5050 connector through.
The spoolholder mounting plate uses 38gr of filament and takes 3 hours to print, the LED holder uses 96gr of filament and takes 7 ½ hours to print. No supports required for both.
Printing:
Spoolholder Mounting Plate:
Wall Line Count: 20 (so that is is a solid block)
Layer Height: 0.2mm
Print Speed: 50mm/s
No supports
LED Holder:
Wall Line Count: 15 (to make it more sturdy)
Layer Height: 0.2mm
Print Speed: 50mm/s
Top/Bottom Layers: 7
Infill Density: 30%
No supports