1 / 14
Futaba Monitor Mount — image 1
1 / 14

Futaba Monitor Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Overview NOTE This is V1, See V2 for the redesign !

Rating
0 / 5
Likes
8
Downloads
41
Makes
0
Views
580
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Overview

NOTE This is V1, See V2 for the redesign !

I was really disappointed with the Futaba T8J Monitor mounts I have found so far, so I decided to design my own. I have designed this primarily for use with the Flysight Black Pearl monitor but I will be modifying this design in the future to make it more flexible. You can use the version without the back support if your device doesn’t line up, I will probably tweak the design a little to soften some of the hard edges and also change the fixing hole to a slot to allow for some adjustment.

Notes

  • It has been designed to be printed in two parts that glue together with CA or Superglue.
  • Once printed and glued the mount can be attached to the controller with 2 tie wraps.
  • There are two versions included - One has the right angled supporting backplate.

Print instructions

Category: R/C Vehicles Summary

Overview

I was really disapointed with the Futaba T8J Monitor mounts I have found so far, so I decided to design my own. I have designed this primarily for use with the Flysight Black Pearl monitor but I will be modifying this design in the future to make it more flexible. You can use the version without the back support if your device doesn’t line up, I will probably tweak the design a little to soften some of the hard edges and also change the fixing hole to a slot to allow for some adjustment.

Notes

  • It has been designed to be printed in two parts that glue together with CA or Superglue.
  • Once printed and glued the mount can be attached to the controller with 2 tie wraps.
  • There are two versions included - One has the right angled supporting backplate.

    Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: No

Supports: No

Resolution: 0.15

Infill: 20%

Filament: Any PLA Post-Printing

Attach Back Plate

Simply glue using CA glue the backplate to the base using the locating lugs and holes. This should make a really strong bond that keeps the back plate rigidly held on.

Version with back plate

Final Glued assembly

Tags