1 / 5
Ferrite mount for Prusa i3 MK3S+ LCD ribbon cable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mount to hold a ferrite on the ribbon cable to the LCD on MK3S+
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 288
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I was getting a wacked out display during the Setup Wizard on my MK3S printer. Thought I'd try adding a ferrite around the LCD cable to see if it went away. It did.
Used OpenSCAD to design a simple mount to hold a ferrite on the ribbon cable to the LCD on my MK3S+ . I use a cable tie to secure the ferrite to the mount. The mount is secured to the printer frame with two T-nuts.
To secure the mount, I printed T_Nut_30x30_Prusa_M5_Nut.stl from:
Drop in T-Nut for Prusa 30x30 Profiles
https://www.thingiverse.com/thing:3998406