Creality Ender Series Low-Profile Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament Guide designed to fit Creality Ender 3 V2 V-Slots, designed for Sprite / direct drive extruders.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Filament guide, designed for filament up to 2mm, to fit Creality Ender aluminium frame extrusions.
This filament guide is not suitable for printers with Bowden tube side-feed extruders, as the frame profile is not a tight fit on the frame of the printer.
Print Settings
Note: It is not recommended to print in the STL included orientation. One of the sides has a 45º flat chamfer rather than the rounded fillet. Print this side down with supports under the frame mount profile. Example GCode included.
The test print photos I have included were printed with the below:
Ender 3 V2, PLA, 205ºC extruder temp, 60ºC build plate temp, 20% infill, supports on, brim build plate on.