MN90 - D90 - Front Chassis Brace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MN90/99 front chassis plate upgrade. No mods to the stock chassis rails are needed.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 123
- Makes
- 1
- Views
- 787
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
MN90/99 front chassis plate upgrade. No mods to the stock chassis rails are needed. Uses only 11 grams of plastic when printed at 0.2 and 20% infill. The stock screws for mounting the body can be used. This chassis plate requires a 17g or smaller servo for steering, the servo is relocated to a better position. See my other parts for an above axle servo mount that's even better and helps remove the bump steer common with the stock setup.
You'll need:
4 x M3 screws (8mm or 10mm will work).
6 x M2 screws (10mm; you'll want 8 if you want to replace the stock screws)
Optional:
2 x M2 Washers (the body mounting holes a little big to allow for adjustment; washes help)
2 x M2 screws (5mm to replace the stock shock screws)
2 x M2 screws (10mm+ to replace the bumper screws)
Print instructions
You'll need supports from the build plate to support the shock stems.