Counting matching models…
Introducing the FDM (Fixum Dude Motors) print in place snowplow. The wheels rotate right off the build plate so you can clear the streets right away. Find the entire FDM Vehicle Collection here:…
Introducing the SnowPlow Scraper—a compact 15cm 3D model designed for rapid ice and snow removal from car windows. The ergonomic shovel handle ensures comfortable use, while the integrated hand guard shields you from the elements. The…
Dieses Set enthält eine Waffenkiste mit zwei Fliegerbomben aus dem zweiten Weltkrieg. Das Modell hat den Maßstab 1:16 und eignet sich perfekt für 1:16 WPL RC Trucks, oder andere Fahrzeuge im Maßstab 1:16. Die Bomben Modelle sollten mit…
This is a rear axle for the C24, B16 and probably other vehicles by WPL. You need to have the metal parts; bearings, rod, gears, etc. It may also work with the stock parts. The margins are tricky, you may have to do some post processing…
Firstly a big thank you and insight into LWPLA on the Bambu Labs X1 Printer from Christopher Karcher on the PlanePrint Pilots on Facebook. His work on the parts for those planes heavily influenced my settings for LWPLA for most other…
Use 1.75mm filament as a hinge between the parts.
With this stl file you can print gas canisters for WPL RC Trucks in 1:16 scale or diecast models. The stl file can be rescaled for other scales. The gas canister can be printed without support materials! If there are any questions, please…
Rear bumper with new holder for RC car model WPL C24 Toyota Hilux. Bumper is from the source: https://www.thingiverse.com/thing:2970496 The bumper bracket is completely new.
Resolution: 0.16mm infill (%): 20 Support: Yes
+5mm offset for the WPL D12 when you want to run more angle without rubbing on the upper control arm and overfenders . WPL D12 D42 focused 5mm to 12mm aqdapter . May fit other wpl models but not sure if it will work with them .
These are Drifting the WPL D12 very well, bone stock! Even better when upgraded Remix of a 1:10 scale RC Drift Rim (Source file/Author unknown; will 100% credit when I find it, Thingiverse) Remix of Gadoga "Tamiya M Chassis Drift Tire…
I came across this on Tinkercad, but it contained quite a few errors in the model, misaligned bits etc. So I cleaned it up and made it more printable and now it lays flat on the print bed, the slats are properly meshed with the crate body…
Place fenders on the body aligning their ends with the lower edge of the body. I used a bit a CA glue to hold it in place, then drilled wholes and added M2 bolts and nuts. I did not remove all the interior parts so in some places the nuts…
Resolution: 0.16mm infill (%): 20 Support: Yes
WPL D12 D42 focused 5mm to 12mm aqdapter . May fit other wpl models but not sure if it will work with them .
[Update 15-5-2019] I bought some lights for this truck and updated my files to allow for easy instalation/wire management. I redesigned the "Spacer" and the "Servo Tray", which now has 2 versions, for a 9g or a 55g servo; with the 9g one,…
This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…
3D printable Aggressive Mud Terrain tire for WPL RC-cars. Not including wheel. Wheel can be found from: https://www.printables.com/model/362102-rc-car-offroad-rim-for-wpl-rc Left & Right side models. --- Print from soft TPU. I recomment…
This set includes a weapon box with cover and a AK 47 model that I designed as load for my WPL RC Truck GAS 66. The Box itself can be printed without supports, for the cover you will need some supports. The AK 47 model can be printed with…
80's Dodge RAM for WPL Frame (1/16th) This is version 2 of my remix originally posted on thingiverse . The original model requires a lot of glue to be held together. This remix features a lot of improvements, such as being assembled with…
Remix of https://www.thingiverse.com/thing:5128517 to allow printing TPU tyres on PLA rims. Also includes a 54mm diameter tyre to keep the same size as the original wheels. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 2S…
+7mm offset for the WPL D12 when you want to run more angle without rubbing on the upper control arm and overfenders . WPL D12 D42 focused 5mm to 12mm aqdapter . May fit other wpl models but not sure if it will work with them .
WPL C24 Bed Rack (Reinforced) *This model is an edited version of someone else's design*
With this model you can print a weapon box with artillery ammunition in 1:16 scale as a cargo for WPL RC Trucks. We also have the perfect to this ammunition fitting howitzer model if you follow this Link:…
Resolution: 0.16mm infill (%): 20 Support: Yes Infill for tires should be 0, make the wall count higher. M4x24 screws - For the wheels.
This model is now depreciated, please use the new one . Are you tired of clearing your driveway by hand? Is it too small to justify a snowblower or other full scale device? Well now, it can take you twice as long, using your RC. This…
Just added some more geometry to just make the bumper a bit stronger. Print Settings Supports: Yes Category: Toys & Games
Beadlock Sunraysia style wheels to fit a WPL C24/C14. Uses M2*12mm hardware. v1 has more negative offset than stock, Fusion 360 file included if you want to modify the offset or use as a base for other beadlock designs. Print Settings…
Couple of parts to make the utb18 skid and shock bolt up to the WPL c74 frame and unlock the real potential of the Jimny
Bottle Box in 1 16 scale for WPL RC Trucks. For printing you will not need supports
SCX24 Snow plow with fully proportional blade allowing you to push snow to either side of your 24th scale road. Using this mount you will be able to mount this directly to the front of your SCX24. I have a FlySky FS-GT5 utilizing the…
A RC-car rim for WPL cars. It has slightly bigger hex size (6mm) so it fits better on the axle, depending on your printer settings it should still be a nice fit. Fits on original WPL tyres. This rim is slightly wider than original! Use…
This is a remix of this file: Mount for Dell WD15 docking station (upside down) by CWempe - Thingiverse Use two M2.5 Screws to fix the adapter to the dockingstation. Use two at maximum 4mm diameter screws to fix the adapter + dock to the…
WPL tubular lower link c24 c14
This is an adapter for a Bruder Tractor to carry a snowplow. Tested on an older Bruder Claas Atles 936 (series 3000) with an old snowplow model, but will probably fit other parts like winches etc. Printed in PLA Step-file included if you…
Snowplow meant for Thomas and Friends G scale trains A replacement for the Bachmann 92101 G Thomas Snowplow Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament: Hatchbox PLA…
The original version is far superior to the stock steering arm. I modified it so the slotted piece of the arm that attaches to the servo was longer. The original model would make the front end dip down when steering extreme left or right.…
This is a chassis mount for running a gyro on your WPL D12 and maybe other WPL cars .
Just my design for adding brakes to a WPL D12 and including 12mm hex adaptors at the same time. Added a V2 version of the front caliper mount. Gives better clearance from the hex mount as some wheels are thicker than others. Print…
Bedliner for WPL C-24 Toyota Trucks - Printed in TPU with a Color swap can net some amazing results. 3 options; Classic Hilux style TRD branding for a modern look and YEEEEHAAAW 'Murica model
WPL C-24 steering system C24 Hilux C-14
Just my design of an Insert to allow different seats to be fitted into a D12. Print Settings Printer Brand: Creality Printer: Ender 5 **Rafts:** No Supports: Doesn't Matter **Resolution:** 0.12 Infill: 25% **Filament:** […
This is an ongoing project for the WPL C44, and as I do the build I will add more items. In genuine WPL fashion - don't expect instructions. I'll provide the files for you to print, pictures, and you get to figure out how YOU want to put…
I wanted to make some "White Spoke" WPL wheels to make my C24 look more like the 1982 Toyota I had as a teenager. While at it, I decided to create a system for making the wheels that doesn't require supports when printing. There are five…
Category: Toys & Games
I printed this out of PETG the proto type was done out of PLA but cracked easily. All infill was done with 40% gyroid. I used 3 supports with long screws that run the full length. When using these on the plow it self you will have to…
This is a 3d printable train track cargo for 1:16 scale WPL RC Trucks. The print does not need any supports!
This is a ladder bar for the rear suspension of a WPL D12. These are commonly used in solid axle drag racing cars to minimize the axle rocking/rolling backward under heavy acceleration. Installed correctly, this will improve grip off the…
To mount the wheel you just need the screw that goes on to the compatible models and you are good to go, install the wheel into the position. Be aware that the original wpl/jjrc tires don't really fit ot these rims and that the little rim…
Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple. Print Settings Printer Brand: Creality Printer: Ender 5 **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 25% **Filament:** […
I printed this upside-down standing up. The same goes for the model. Needs supports, I also used a 2 layer raft. To attach the grill to the cabine part I used a tiny bit of hot glue on the tabs on the inside.
Electronics mounts for the WPL D12 (1:10) ESC holder designed to hold the WPL 15A ESC. Rear tray is to hold a receiver / gyro etc. I'm using a FlySky FS-BS6 to cover both but I needed to trim down the connectors to clear the tray. Also…
This is a Chassis made for the C24 and other similar models. It has a wide range of shock mounts for many sizes and angles of shocks to dial in a perfect ride height. I added some arches so the axles can go up higher in the chassis for…
Easy to print car toy Print instruciton: Support: No Material : anything you have Stay with us here and on my social media www.instagram.com/jp_3d_design
I designed this stand trying to do it both material-efficient and as stable as possible. i wanted to do it printable all in one peace. It uses the front and rear axles to provide a safe stand for your MN90 and MN99 RC model. Im not shure…
Printed with ABS. 4pcs M2x3 wafer head Screw 4pcs M2 Nut some 7x0.2mm Nickel Plated Steel Strip 2pcs M3x20 screws 2pcs M3 brass inserts (or print "18650x2_v4_case_plastic_taping.stl" and tap thread in plastic) Covers just glue after…
WPL B24 přídavný rám pod korbu se zapuštěnýma maticema M3 4x
This model is for axle shims for WPL remote control trucks. My model truck is C24 with plastic axles but it may work with metal axles or other models. This is an M2 washer with a M3 hole. Model is 0.2mm thick so you can print multiple if…
Model felgi dla Arocs Double E do opon z serii Wpl RC. Druk najlepiej z niepełnymi podporami, aby było łatwiej usunąć. Opony najlepiej wypełnić pianką i wkleić, aby nie spadały. Wykorzystuje orginalne maskowanie sruby koła. Wheel rim…
MN45 truck bed frame scale 1:12 WPL Toyota Landcruiser
Should be drop-in replacement. Does not have the tow hooks or room for a winch. If you need that, send me a message.
Wall hanger for The Snowplow "the Original Snow Pusher" shovel.
I designed the Elgato Stream Faceplate to be a quick and easy print. Then allowing a great way to personalize your stream decks a bit more, but also add a bit of protection. Minor supports required depending on orientations or print type.…
You can press it in place and hope for the best or add a tiny bit of hot glue. I have printed it without supports using PLA on 0.15mm
Replacement pinion gear for WPL D12 I used for bushless conversion. Press fit onto shaft.
This is an ESC chassis mount for the WPL D12 , may fit other WPL cars but not sure .
ZRCÁTKO SE SKLÁDÁ ZE DVOU ČÁSTÍ JE TŘEBA JEŠTĚ STÁHNOU DRŽÁK ZRCÁTKA KTERÝ PASUJE NA LEVOU I PRAVOU STRANU
Just a simple rock slider for WPL C24. I'm not sure if it will fit other models.
Great work by HansHeld on his trailer. I wanted to modify the trailer frame to fit the stock rear end of the wpl b16 truck, as I had one to use. Printed perfectly, frame fits perfectly (tight, but solid) with stock rear axle mounts. Will…
I was trying to install the 370 motor with low gearing to my C24. It turned out the upper part of the motor is colliding with the standard position of the truck bed. This model is my attempt to move the motor down. Additionally it…
Cobra Theme Diff Cover for WPL 1/14 and 1/18 scale Trucks
I really liked both designs I remixed from, but I saw a bit of an idea to try. These WPL and JJRC trucks are pretty darn light weight. Which, in theory, could be bad for traction. And in some models they're a bit top heavy and can easily…
WPL C24 lowered bumper mounts, use a B-Series Bumper or something custom, mounts using stock crossmember screws.
Gridfinity bed for the RC kei truck from WPL called D12. https://www.wpl-rc.com/products/d-12 I jokingly call this the On-The-Goridfinity
PO DVOU NEHODÁCH KDY JSEM MUSEL TISKNOUT NOVÁ ZRCÁTKO JSEM SE ROZHODL VYTVOŘIT NOVÁ ABY SE PŘEDEŠLO ŠKODÁM
Rc karoserie Gaz 69 pro podvozky WPL
For each wheel you need an inner , outer and ring part. To clamp the rim to the tire you need 9 screws, I use black 6mm M2 screws. You can print the inner and outer half on the narrow side.
JE TŘEBA STÁHNOUT JEŠTĚ DRŽÁK ZRCÁTKA KTERÝ PASUJE NA LEVOU I PRAVOU STRANU
New version https://www.printables.com/model/787091-wpl-b16-electronics-plate --- This goes from the front bumper all the way to the back of the cabin. The large hole is for the cables, the two small holes to attach it to the original…
WPL dimension rims for inspired D110 Land Rover Defender 1/16 scale for MN-90 RC defender
Rc karoserie na podvozky Wpl, k stavbě není plánek ale lze to s trochou představivosti zkompletovat.
This is a remix of a male plug for garden hoses by Fragger. I added a hole down the center, and a tapered inlet to fit the nozzle of an air compressor blower. This is to be used to blow water out of sprinkler lines so they are not damaged…
Zatím nejlépe fungující verze opravdu chladí. Klapky dodám hned jak bude čas.
Easy to print, compact, sturdy (when printed with suitable material). Give it a try and let me know!
Increased spring shackles for WPL C94 UAZ-469. Also suitable for other WPL models. (SolidWorks 2020)
Korba se zapuštěnými šrouby na upgrade rám
Please like this model, it helps me dedicate time to making custom models! If you do remix this please link to this, it took over two dozen attempts to have this fit correctly. This is a snap in clip for the WPL-C24 Toyota Hilux looking…
Sander hopper for the wpl series pick up trucks Note… this is a vibration hopper you have to get a couple rumble packs out of a old controller and wire them up as a servo and it'll provide enough vibration that sand will actually come out…
MEZIKUS MEZI MOTOR A 2SPEED PŘEVODOVKU, JEDNÁ SE O REDUKCI ABY BYLO MOŽNÉ NAPASOVAT VĚTŠÍ MOTOR. PŘEVODOVKA MUSÍ BÝT OTOČENÁ MOTOREM DOZADU JINAK PŘEKÁŽÍ KABINA. VŠE PASUJE ALE JE TŘEBA SI S TÍM TROŠKU POHRÁT
With this plate you can neatly hold all your electronics (maybe, I don't know what you got) and you can mount a power switch. It fits neatly and the cabin can still be screwed to the frame as usual. It sits on top of the old thingy that…
Its a rear wing that may or may not improve the performance of a WPL D12. You will need to drill holes and have screws about to mount it. Takes 2xM3 and 2xM2 screws. don't know why I did that but I'm not changing it. yes it is rather…
Na zajištění kabiny v případě odstranění držáku na náhradní kolo
Rozdvojen komín odsávání. Funguje
this rear end rack back is able to fit the rear end of the WPL C34 i know it will work and fit well. because i own 2 of them. it should be strong enough that if you flip it off a cliff it should be fine. i might put out a conversion kit…
MODEL ZESÍLENÝ A PŘIPRAVENÝ PRO DALŠÍ VYLEPŠENÍ KTERÉ BUDE ZA NEDLOUHO
An ice scraper with hand shield. The Armored Snowplow!! Print with a lot of walls for strength. No support!
This is a rally WPL D12. The underfloor gets abused, So I made this as a swap in part for the underfloor to increase the ground clearance of the chassis. This design fits first and second generation chassis. There are two versions just in…
I have modify my eletronic to brushless, so i designed a open trunk lid for a better colling and a mounting point for the on/off switch.
