1 / 3
Adapter for RepRapDiscount Full Graphic Smart Controller to Wanhao Duplicator i3 Control Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's not pretty, but it's functional, quick to print and does not require opening up the case again.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Other required parts:
- 4 x M3*3 mm heat set inserts. Feel free to modify for hex nuts - source file is included
- 4 x 12 mm M3 bolts
- 4 x 1.8 mm M3 spacers between the PCBs
- 4 x ≈2-3 mm M3 spacers between the adapter bracket and the PCB
Installation instructions:
- Fasten the PCB to the bracket with the bottom two holes only
- Pinch the top arms of the bracket together as you insert it into the rectangular hole of the control box
- Once the rectangular hole is engaged, fasten the remaining two bolts