1 / 10
SOLDER STAND
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Soldering the easy way!
- Rating
- 4.5 / 5
- Likes
- 35
- Downloads
- 167
- Makes
- 2
- Views
- 1,063
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I would recommend printing this model at 0.2 mm layer height to get a better surface finish and to make it more easy to clip in the holder for the solder wire.
I used two 608Z ball bearings.
Print with no supports.
You will need to print 2x solder_roll_adapter.
The diameter of the solder spool is 11mm and for the ball bearing it's 8mm. This may varies in your special case so you may have to scale the solder_roll_adapters for your specific case.