1 / 5
U2x30cm Rack 19" server case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small server case for ATX/mATX motherboard and TFX power supply, supports only M.2 drives
- Rating
- 0 / 5
- Likes
- 249
- Downloads
- 1,115
- Makes
- 1
- Views
- 11,876
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
U2 Rack 19" 30cm depth server case for ATX based systems
Can be printed on any printer that have 20cm x 20cm print bed.
Small server case for ATX/mATX motherboard and TFX power supply, this case supports only M.2 drives
Assembly requirements
- M3 1.5cm screw for case assembly
- M3 0.5cm screw for motherboard mount
- M3 nuts
- Strong glue(i've used hot glue)
- 3x 60mm fans
- GPIO wires to assembly power button and status leds
- longer than regular M6 screws to mount into your rack
Print recommendations
- DO NOT PRINT WITH PLA, USE PETG OR ABS
- 0.8mm nozzle and 0.5mm layer height
- 100% infill
- 250% infill speed
- 240 celcius
Printing estimations(with settings above)
- 1200 g plastic
- 20-30 hours
I am not responsible for any damage caused by incorrect use of the housing and/or wrong printing technique