Prusa i3 MK3s brace with active filter mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you need more space in your enclosure, this could be an option!
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 28
- Makes
- 1
- Views
- 439
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed more space in my LACK enclosure. So I decided to combine the existing bracing (from raykamp) and the active air filter fan (from StanleyB) that I used and already printed.
I did some little improvements of the brace, because all the holes were very tight and the M4 nuts won't fit into the holes. Now you can decide if you want to use M3 or M4 srews and nuts.
As an option, if you haven't print the active filter yet, i designed an option, where i removed the mounting from the fan case.
**Print Instructions**
*Brace
Supports: No
Resolution: 0.2mm
Infill: 25% Gyroid
*Fan Case without the mounting
Supports: No
Resolution: 0.2mm
Infill: 15% Gyroid