Dimmable light switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I made this holder for a potentiometer and a little switch so you can dim for example LED strips. I used this for a Bambu Lab X1 Carbon from a friend of mine.
I made a youtube video about this project:
Print settings:
- Part 1: 0,15 mm Layer heights - 20% Infill - 55mm/s - No supports
- Part 2: 0,15 mm Layer heights - 20% Infill - 55mm/s - No supports
- Part 3.2: 0,15 mm Layer heigts - 20% Infill - 55mm/s - Tree supports
Required materials:
- Potentiometer/dimmer: https://opencircuit.be/product/2k-ohm-lineaire-potentiometer-2-stuks
- Mini switch: I found the switch on a PCB of a broken PC mouse
- You may need a M2x6 bolt to fasten part 2 onto part 1 but you can also need some (hot) glue.