1 / 3
CCTV arm replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement part for our CCTV. I don't know if it will fit another CCTV arm as well but you can try. There is
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 32
- Makes
- 0
- Views
- 369
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Printed in PETG as it will be exposed outdoors. There is a relief on the side because I cannot fit the wires through or remove the connector from the inside (glued). I just removed the old arm using a cutoff disc and a Dremel.
I printed it with the thread on the bottom.
No supports
Added a brim for adhesion