Bambu Lab X1 LED Light Frame Front Switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Latching switch for front right end post
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 77
- Makes
- 1
- Views
- 1,794
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The touch dimmer switch in the original model was overheating and would not work after a few minutes. I suspect the switch is unable to handle the current draw of COB lights (24V @ 15W).
I also wanted the switch near the front to make it easily accessible.
I ended up remixing endpost_B to add a 12mm diameter hole for a latching switch with no dimmer function. Reason is because a lot of the dimmer switches are unreliable and I usually like the light on at full brightness to inspect print conditions.
Here's the switch I used: https://www.amazon.com/dp/B08LV5DWLG
The switch wiring is straight-forward - it comes with a wiring diagram in the package.
I wired mine so that the ring around the button comes on when the light is on. You can wire it to always have it on.
Note: simply mirror the model to put it on the left side instead of the right side.