1 / 5
Hinge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinge for an enclosure and much more.
- Rating
- 4.667 / 5
- Likes
- 107
- Downloads
- 850
- Makes
- 9
- Views
- 4,491
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello everyone,
here is the hinge I used for my enclosure. It is designed for a 5 mm heel. If you also use a gasket or need more distance, a spacer is included. The total height is 80 mm and the total width is 56 mm. The hole diameter is 4,5 mm. Please use a brim.
No supports
No screws
Printer: Original Prusa i3 MK3S+
Nozzle diameter: 0,4
Material: PLA
Layer height: 0,15 mm
Perimeter: 5
Brim: On