Sim Racing 8x8 LED Case/Mount (For Gears/Flags/etc)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case I created to mount an 8x8 WS2812B LED matrix to use for sim racing to display gears and flags.
- Rating
- 0 / 5
- Likes
- 56
- Downloads
- 344
- Makes
- 0
- Views
- 3,723
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Included is a two piece case for an 8x8 WS2812B LED matrix. I use this wired up into an Arduino Uno connected via USB to my PC and controlled with SimHub.
Materials
Here is the exact 8x8 LED matrix I bought from amazon:
Also required are 4 M3x8 self tapping screws. Here's the assorted kit I used:
M3 Self-Tapping Wood Screw Assortment Kit
And I used this double sided gel tape to stick it to the bottom side of my monitor, but the tape is so strong it works on everything. And it stretches to take it off (similar to removing 3m adhesive strips for wall hooks) so I've put it on walls, tables, plastic, etc and if you are careful and stretch the tape longways when removing it, you can remove it without damage:
Printing Instructions
- .2mm layer height
- 15% infill
- Overture Matte Black PLA