1 / 3
P1P Vision Enclosure Magnet Supports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These Supports are for the P1P Vision Enclosure and the Magnets you need for the Door and Sidepanels
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 92
- Makes
- 0
- Views
- 1,493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Holds the magnets in place and is more relailable. For the Sidepanels two versions are available. Single Magnet Holders or long stripes.
- PLA/PETG/ABS/ASA
- Infill 100%
- Brim
You need Suplerglue, clean the panels and parts with alcohol before you glue them.
It's all fun and games until you glue the sidepanel or door to the Printer. Yes i did. Let these dry for a long Time and a long time means hours ;)