Stealthburner Toolhead Board Cover with Integrated 3DO Nozzle Camera PCB Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified Stealthburner toolhead board fan cover to replace fan with a mount for the 3DO Nozzle Camera PCB.
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 260
- Makes
- 0
- Views
- 3,567
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I modified a Stealthburner toolhead board cover with fan to replace the fan with a place to mount the PCB for the 3DO Nozzle Camera. I didn't want to mount the PCB at the ADXL location and couldn't come up with a good mounting spot behind the extruder motor or under the cable chain mount.
I am using this with a BTT EBB SB2209 toolhead CAN board but I think it should work with other toolhead boards. The PCB slides in snuggly and may not even need fastened down, however there is a notch on each side intended to take a M2 self tapping screw to secure the PCB if you would like. Be careful however, as some components are very close to the edge of the PCB and could potentially be damaged by the screw.
Model can be printed without supports.