Folding Briefcase Handle for DJI NATO Adapter (RS 3 Mini)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shoot lower, smoother and more diverse by adding a "briefcase handle" to your DJI NATO port
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 310
- Makes
- 4
- Views
- 2,281
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After finally purchasing a DJI camera stabilizing gimbal (RS 3 Mini) for my DSLR, I considered purchasing the additional “briefcase handle” to assist with getting lower and more stable shots… Then, I decided to make my own. Enjoy!
Note - the NATO connection is pretty tight the first few times you connect it. Be careful not to break the printed connector when forcing it on. After about 3 times putting it on/off it loosens up a little as the PETG wears - I prefer this to it being too loose.
Key features:
- Connects to the RS 3 Mini via the side NATO port using two M4x10mm bolts
- Vary the handle orientation in 22.5º increments
- A single M4x25mm hex head bolt + nut are used as the main axel, which combines with paired dimples on the connector and handle to lock the handle in position
- Folds up for easy storage when not in use
- No support materials need (see slicer files for orientation)
Print Recommendations:
Nozzle: 0.6mm
3 Perimeters
30% Infill
0.3mm layer height
Material: PETG
Extra Items Needed:
- 2x M4x10mm bolts
- 1x M4x25mm hex-head bolt
- 1x M4 hext nut
To support my design, you can purchase parts from Amazon using my affiliate links.
Canada: https://amzn.to/412BEtj
Disclaimer: I love my camera, and I'm sure you love your's too - so please be careful. I take no responsibility for damage that comes to your equipment from using this device.