1 / 5
Falcon F16v3 Expansion Board Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount will allow you to mount a Falcon F16v3 (works on V2 as well) Expansion board to a PSU. You will need to…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This mount will allow you to mount a Falcon F16v3 (works on V2 as well) Expansion board to a PSU. You will need to print 4 spacers. The tolerance for the spacers is tight, they should fit inside the holes on the top of the board.
Mounting Hardware
2 M4 screws for the mount to the PSU
4 M3 screws/nuts to secure the controller to the mount.
Category: Electronics