Fractal Define R6 - 3.5 Slot GPU Vertical Riser (VRC-25 REQUIRED)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3.5 Slot Riser for Fractal Define R6 in combination with the VRC-25 adapter.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 204
- Makes
- 0
- Views
- 2,764
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
With this print you can mount modern 3.5 Slot GPU's like a RTX 4080 (e.g. Palit Gamerock 4080) vertically inside the older Define R6 combined with the VRC-25 Riser (REQUIRED) from Fractal.
I Included the .3mf file for optimal printing with the new Organic Support feature. This works flawless if you are using Prusament PLA + PEI Sheet.
Slot in five M3 hex nuts into the designated spots. Use the original black M3 screws to mount the printed part the standoffs. Install VRC-25 Riser Cable onto printed part using M3x10mm allen head screws, insert VRC-25 into PCI slot afterwards. Take GPU and install monitor cables before installing the GPU into the VRC-25 Riser. Mount GPU using the same black M3 screws used for installing the printed part onto the standoffs.